Hiring, Training and Supporting the Workforce in School and on the Job

Virginia’s Rolls Royce Crosspointe plant shares its strategies for attracting, hiring and supporting its workers, while Danville Community College excels with its integrated machining education model.
Friday, June 30, 2017 1 comments

A recurring topic of discussion during my recent trip touring Virginian manufacturing facilities was labor: finding it, hiring it, training it. For some manufacturers, the local reality is that there are not enough already-skilled people looking for work. Hiring under these circumstances entails offering access to technical education of some kind, or a lot of on-the-job training. On the other hand, some other manufacturers have been able to partner with local higher-education institutions in order to establish “pipelines” of people with the skills necessary to begin work with less additional training.

On-the-Job Training :Rolls Royce Crosspointe’s model is taking advantage of both routes. The aerospace manufacturer has some aggressive short-term hiring goals: hire another 36 people by the end of 2017, 50 more in 2018.

That’s not going to be easy. Manufacturing Executive Lorin Sodell says that a skilled workforce represents one of Crosspointe’s biggest challenges of late. He says the plant ultimately hires about one resume out of every hundred. Despite the difficulties inherent in this process, the company is doing some interesting things to stay engaged with the potential labor pool and to encourage ongoing education and advancement for its existing employees:

Biweekly assessments: The recruitment process at Rolls Royce has multiple steps, culminating in biweekly assessments of as many as 12 applicants at a time. Rather than a competitive environment, Mr. Sodell says that the day-long assessment is a space for applicants to relax and “be themselves.” Candidates get an overview of the factory and an employee-led tour of shop operations. Then they are interviewed with a focus on “soft skills,” such as how they’ve responded in certain situations in current and former working roles, and how they plan and organize their work. After a casual lunch, a group exercise assesses how comfortable the candidates are in communicating ideas and working as a team. “Their experience and education is typically what get them in the door,” says Mr. Sodell, “but it’s their personality and behavior that will allow them to succeed at the Assessment Center.” He adds that this process has enabled Crosspointe to attract people with widely diverse personalities and work styles.

Apprenticeships: Crosspointe participates in an accredited apprenticeship program organized through the Community College Workforce Alliance (CCWA), a regional partnership out of John Tyler Community College. Mr. Sodell says that new hires at Crosspointe often join the apprenticeship program.

Secondment and cross training: Mr. Sodell explains that when Crosspointe started each of its factories, initial hires didn’t have the necessary skills or experience to excel. With that understanding, these hires completed a “secondment” (a model more common to European employers), traveling to sister plants in the United Kingdom to imbed with more experienced colleagues for up to six months. Those who completed this program were then able to train additional hires back in Virginia. Within Crosspointe, employees are encouraged to cross-train in other areas of the shop in order to obtain additional skills certifications. The secondment approach of detaching from one’s usual milieu to learn from colleagues over several months gives employees a chance to branch out and provides obvious long-term value to Rolls Royce.

Boarding: Rolls Royce aims to have clearly defined “ladders” for employees to advance in responsibility and compensation. Arranged by skillset (for example, CNC machining, non-destructive testing, inspection, etc.), each advancement path has internally published criteria that employees can follow. “We purposely do not put any minimum or maximum timeframes on when an employee can or should progress,” Mr. Sodell says. “In this way, there are neither ‘entitlements’ nor capacity controls on the number of people who can progress.” One avenue for advancement revolves around employees’ initiative to acquire new skills and challenge themselves. Twice per year, Mr. Sodell explains, Crosspointe opens “boarding windows” during which an employee assembles and submits an “evidence pack” and demonstrates before a three-person panel that they have mastered certain requisite skills. The panel works to accommodate the individual style and approach of each of these projects to see what people are capable of. “The standards are high, but so is the success rate,” he says.

Partnerships with schools: According to Mr. Sodell, Rolls Royce has been recruiting from area community colleges and high schools since 2011, “and the relationships get stronger every year.” Paid internships for high school students usually lead to full-time offers when they graduate. Additionally, the community colleges have invited Rolls Royce to review and make suggestions on their curricula multiple times, ensuring that graduates meet manufacturers’ needs.

The company’s support for its employees to cross-train, continually learn and demonstrate their skills by rewarding creative problem solving contribute to what seems to be a vibrant and diverse labor culture at the plant.

Building Paths from Schools to Skilled Jobs One of the organizations Rolls Royce Crosspointe collaborates with for skilled labor is the Gene Haas Center for Integrated Machining. The center was built on the campus of the Institute for Advanced Learning and Research (IALR) in Danville, Virginia, and offers an impressive Integrated Machining Technology (IMT) lab for training in partnership with Danville Community College (DCC).

Troy Simpson, director of advanced manufacturing at DCC, presented on the regional capacity of the college’s machining programs, which include dual-enrollment programs in high schools as well as community college and IALR-based programs. These programs provide aligned curricula enabling high school students to earn a machining degree in one year. So far, the high school machining program has enjoyed a 99-percent pass rate, and all the programs together are projected to produce some 270 precision machining graduates per year.

The community college offers a two-year Precision Machining Technology program aligned to NIMS level II standards and a third-year Integrated Machining Technology “capstone” program in the IALR Gene Haas Center, which replicates a real-world production cell to teach students lean principles, process optimization, leadership principles and manufacturing economics to NIMS level III standards. Additionally, DCC offers a Dimensional Inspection metrology program taking advantage of the Gene Haas Center’s separate metrology lab, teaching students how to inspect precision components based on geometric dimensioning and tolerancing (GD&T) principles, how to operate and program coordinate measuring machines (CMMs), and how to conduct bench inspections. The program certifies students as ASQ Certified Quality Inspectors (CQIs).

In the future, Mr. Simpson says that DCC intends to add new technologies to its educational programs, such as additive manufacturing and data-driven manufacturing.

A number of OEMs are involved with DCC’s efforts, including Sandvik Coromant, Haas, Renishaw, Autodesk, Mitutoyo, Master Gage & Tool, Rolls Royce and BWX Technologies. Kyocera SGS Precision Tools has begun building a new technology and R&D center (a “Tech Hub”) right across from the IALR campus. Jason Wells, chief technical officer with Kyocera SGS, says that often the company has to hire engineers from wherever they are available and then relocate them to where they’re needed (such as the Tech Hub to be built in Virginia). But with DCC’s programs in full swing, he says they actually have “too many to choose from.”

Troy Simpson
Danville CC
ph: 434-797-8558


chrisb says:
Saturday 08 , 2017 at 05:36 PM

Leave a Reply

HTEC Terms and Conditions
es fr pt

Terms and Conditions


Your access and use of the Haas Automation - HTEC Network website (the "Site") (www.HTECNetwork.org) is subject to the following terms and conditions ("Terms and Conditions") and all applicable laws. By accessing and browsing the Site, you accept, without limitation or qualification, the Terms and Conditions and acknowledge that any other agreements between you and Haas Automation, Incorporated are superseded and are of no force or effect.

1. You should assume, unless otherwise noted, that everything you see or read on the Site is copyrighted and may not be used, except as provided in these Terms and Conditions or in the text on the Site, without the written permission of Haas Automation, Incorporated. Haas Automation, Incorporated neither warrants nor represents that your use of materials displayed on the Site will not infringe rights of third parties not owned by or affiliated with Haas Automation, Incorporated.

2. While Haas Automation, Incorporated uses reasonable efforts to include accurate and up to date information on the Site, Haas Automation, Incorporated makes no warranties or representations as to its accuracy. Haas Automation, Incorporated assumes no liability or responsibility for any errors or omissions in the content on the Site.

3. Your use and browsing of the Site is at your risk. Neither Haas Automation, Incorporated nor any other party involved in creating, producing, or delivering the Site is liable for any direct, incidental, consequential, indirect, or punitive damages arising out of your access to, or use of, the Site. Without limiting the foregoing, everything on the Site is provided to you "As Is," without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, or non infringement. Please note that some jurisdictions may not allow the exclusion of implied warranties, so some of the above inclusions may not apply to you. Check your local laws for any restrictions or limitations regarding the exclusion of implied warranties. Haas Automation, Incorporated also assumes no responsibility, and shall not be liable for any damages due to computer viruses that may infect your computer equipment or other property on account of your access to, use of, or browsing in the Site, or your downloading of any materials, data, text, images, video, or audio from the Site.

4. Any communication or material you transmit to the Site by electronic mail or otherwise, including any data, questions, comments, suggestions, or the like, is and will be treated as non confidential and non proprietary. Anything you transmit or post may be used by Haas Automation, Incorporated or its affiliates for any purpose, including but not limited to reproduction, disclosure, transmission, publication, broadcast, and posting. Furthermore, Haas Automation, Incorporated is free to use any ideas, concepts, knowhow, or techniques contained in any communications you send to the Site for any purpose whatsoever, including but not limited to developing, manufacturing, and marketing products using such information. Images of people or places displayed on the Site are either the property of or used with permission by Haas Automation, Incorporated. The use of these images by you, or anyone else authorized by you, is prohibited unless specifically permitted by these Terms and Conditions or specific permission provided elsewhere on the Site. Any unauthorized use of the images may violate copyright laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes.

5. Unless otherwise noted, the trademarks, logos, and service marks (collectively the "Trademarks") displayed on the Site are registered Trademarks of Haas Automation, Incorporated. Nothing contained on the Site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any Trademark displayed on the Site without the written permission of Haas Automation, Incorporated or such third party that may own any Trademarks displayed on the Site. Your misuse of the Trademarks displayed on the Site, or any other content of the Site, except as provided in these Terms and Conditions, is strictly prohibited. You are also advised that Haas Automation, Incorporated will aggressively enforce its intellectual property rights to the fullest extent of the law, including the seeking of criminal prosecution.

6. Haas Automation, Incorporated has not reviewed all of the sites linked to this Site (if any) and is not responsible for the contents of any off Site page or any other sites linked to this Site. Your linking to any other off Site pages or other sites is at your own risk. Although Haas Automation, Incorporated may from time to time monitor or review discussions, chats, postings, transmissions, bulletins boards, and the like that may appear on the Site, Haas Automation, Incorporated is under no obligation to do so and assumes no responsibility or liability arising from the content of any such locations, nor for any error, defamation, libel, slander, omission, falsehood, obscenity, pornography, profanity, danger, or inaccuracy in any information contained within such locations on the Site. You are prohibited from posting or transmitting any unlawful, threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic, or profane material or any material that could constitute or encourage conduct that would be considered a criminal offense, give rise to civil liability, or otherwise violate any law. Haas Automation, Incorporated will fully cooperate with any law enforcement authorities or court order requesting or directing Haas Automation, Incorporated to disclose the identity of anyone posting any such information or materials.

7. Haas Automation, Incorporated may at any time revise these Terms and Conditions by updating this posting. You are bound by any such revisions and should therefore periodically visit this page to review the then current Terms and Conditions to which you are bound.

(or press ESC or click the overlay)